Quantum L4-1588cc 1.6L DSL SOHC Turbo (1982)
Flex Plate: Technical Service Bulletins
Drive Plate - Revised Installation Procedure
Group: 13
Number: 93-04
Date: July 31, 1993
Subject:
Drive Plate, Installing (Revised Procedure)
Model(s):
Quantum with 089 Automatic Transmission
The drive plate (2 versions) installation procedure for the Quantum Repair Manual (Microfilm) is incorrect.
Only use the procedures in this bulletin when installing a drive plate.
Drive plate, installing
Note
Identify which drive plate version is installed before proceeding.
Old Version
Drive plate with thicker disc -1-, install using new bolts
^
Chamfer on base of disc must point toward the drive plate
-
Tighten bolts to 30 N-m (22 ft.lb.)
-
Measure dimension -a- at 3 points and calculate the average value
^
Must be 31.3 +/- 0.7 mm
If NO
Install shim(s) -2- until specified value is obtained
Tighten bolts to 60 N-m (44 ft.lb.) + an additional quarter turn (which can be applied in stages)
New Version