Quantum L4-1715cc 17L SOHC (1983) Clutch Release Bearing Issues
Clutch Release Bearing: All Technical Service Bulletins
Clutch - Binding or Shifting Problems
Applies To
ALL WATERCOOLED
WITH MANUAL TRANSMISSION
Group 30
Subject Clutch Binding-Shifting Problems Part Identifier N/A
Key Points Lubricate splines of clutch disc/main shaft and release bearing guide sleeve
C
Number
83-03 August 12, 1983
Corrosion or insufficient lubrication of clutch disc/mainshaft splines, and release bearing guide sleeve on 013/014 transmissions, may cause clutch
binding or shifting problems.
Repair Procedure
-
remove transmission
-
disassemble clutch assembly, inspect parts, and replace worn components clean mainshaft/clutch disc splines and coat with MOS2 grease For
transmission 013/014, also perform the following:
-
inspect release bearing guide sleeve and replace if worn. Coat with Molykote(R) spray or equivalent
-
grease contact area of clutch release bearing
-
reinstall transmission and check operation