volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Idle Stabilizer - Checking/Adjusting Procedures|Page 2150 > < Idle Stabilizer - Checking/Adjusting Procedures|Page 2148
Page 5
background image

-

connect multimeter US 1119 to both terminals of throttle switch harness connector, set meter to ohms scale

^

throttle in idle position = 0.0 ohms (continuity) throttle slightly open = infinity ohms (open)

-

connect multimeter US 1119 between terminal 13 of relay socket 11 and thermoswitch wire (brown/ black)

^

0.0 ohms (continuity)

If resistance OK but idle stabilization NOT OK (engine speed varies):
-

replace control unit

Note

Quantums, model year 1984, use a separate control unit for the idle stabilizer valve. Part numbers:
^

Automatic transmission 443 907 393 K

^

Manual transmission 443 907 393 J

CAUTION

Part numbers are for reference only. Consult your Parts Department for the latest information.

Idle stabilization, model years 1985-1987

Requirements
^

Engine oil temperature minimum 80~C (176~F)

^

Ignition timing OK

^

A/C switched OFF

Idle Stabilizer - Checking/Adjusting Procedures|Page 2150 > < Idle Stabilizer - Checking/Adjusting Procedures|Page 2148