Quantum Syncro AWD L5-2226cc 2.22L SOHC (1987)
If NO
-
adjust throttle by-pass screw (arrow) until 430 +/- 20 mA is obtained
-
check idle speed
^
800 +/- 70 RPM
CAUTION
Part numbers are for reference only. Consult your Parts Department for the latest information.
Thermoswitch, checking
-
disconnect thermoswitch harness connector and attach multimeter US 1119 to thermoswitch
^
below 30~C (86~F) = 0 Ohms (continuity) above 40~C (104~F) = Ohms (open)
If NO
-
replace thermoswitch
(Part Number:
035 919 369B)
Idle stabilization valve, checking
Requirement
^
Engine oil temperature approximately 50~C (122~F)
-
switch ON ignition
^
idle stabilizer valve must hum and vibrate
If NO
-
disconnect idle stabilizer valve harness connector
-
attach multimeter US 1119 to harness connector set meter to DC volts
-
switch ON ignition