R32 4Motion V6-3.2L (CBRA) (2008)
/Page-1795001.png)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Rear Lid Trim
Rear Lid Trim
Removing
-
Remove two screws - 1 - from handle recess (2 Nm).
-
Remove trim from mounts in rear lid using disassembly pliers 3392 . Start from lower edge of rear lid.
-
Remove rear lid trim - 2 - on both sides from window frame trim - 3 -.
-
Remove trim in centering pin area - 4 - and - 5 - from mounts in rear lid.
