R32 4Motion V6-3.2L (CBRA) (2008)
-
Disconnect the electrical harness connectors present.
-
Drain coolant and disconnect coolant lines.
-
Disconnect condenser lines.
-
With a second technician, remove guide rod T 10093 on longitudinal member on left and right sides and lift out lock carrier.
CAUTION: If lines for A/C system and/or for coolant are disconnected, the powertrain aggregate must no longer be started.
NOTE:
-
Do not hang condenser and hydraulic oil cooler on hoses.
-
Lines for condenser and hydraulics must not be kinked.
Installing
To install, perform the steps used for removal in reverse order.
-
Make sure that all plug- and hose connections are corrected installed when reassembling.
-
Center the lock carrier on the longitudinal members and between the fenders 00 Body Panel Gaps.