R32 4Motion V6-3.2L (CBRA) (2008)
-
Set outer brake pad - 2 - with retaining springs into brake caliper.
-
Place brake caliper with brake pads on brake carrier.
-
Tighten brake caliper to brake carrier using both guide pins.
-
Install both protective caps.
-
Insert brake caliper retaining spring in brake pad retaining spring and press under brake carrier.
-
Connect brake pad wear indicator connector.
-
Install wheels.
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
Check brake fluid level after replacing brake pad.
Tightening Specifications