R32 4Motion V6-3.2L (CBRA) (2008)
-
Disengage the catches - arrows - from the adjusting level - 1 -.
-
Disconnect the adjusting lever from the curved washer.
-
Disconnect the curved washer - 2 - from the air intake housing.
Installing
NOTE: When installing the curved washer, make sure the guide pin for the air flow door adjusting lever is seated in the groove.
-
Mount the curved washer - 1 - on the air intake housing.
NOTE: Make sure the guide pin for the recirculation air door adjusting lever is seated in the curved washer groove.
-
Mount and latch the recirculation air door adjusting lever.
Defroster
Defroster
Removing
-
Remove the instrument panel
-
Remove the bolts - 1 - and - 3 - (9 ± 1.3 Nm).