R32 4Motion V6-3.2L (CBRA) (2008)
-
Remove bracket - 2 -.
-
Mark connector - C - to control motor (danger of interchange with other connectors of same construction).
-
Disconnect connector - C - on Defroster Door Motor V107.
-
Remove securing bolts - A - (1.4 Nm) and remove Defroster Door Motor V107 - B -.
-
Disengage control motor lever - E - from connecting rod - D -.
Installing
Install in reverse order of removal.
NOTE:
-
After installing, function of defroster door must be checked.
-
Initiate "Basic Setting" function with Vehicle Diagnosis, Testing and Information System VAS 5051 (or succeeding model)
Left Temperature
Left Temperature
Removing
-
Remove left footwell vent
-
Remove the left footwell center console trim.
-
Remove Data Bus On Board Diagnostic Interface J533
-
Remove the bolts - 3 - (9 ± 1.3 Nm).
-
The bolts - 1 - are not to be removed.
-
Do not remove the bracket - 2 -.