R32 4Motion V6-3.2L (CBRA) (2008)
Haldex Clutch Fluid: Service and Repair
Haldex Clutch Oil Level, Checking
Haldex Clutch Oil Level, Checking
Special tools, testers and auxiliary items required
^
Torque wrench 5-50 Nm VAG 1331
^
Vehicle diagnosis, testing and information system VAS 5051B or subsequent unit
^
Diagnostic lead VAS 5051/6A
or
Diagnostic lead VAS 5051/5A
or
Vehicle diagnosis and service system VAS 5052
Diagnostic lead, 2 m VAS 5052/3 A
or
Diagnostic lead, 5 m VAS 5052/3 A-1
also for adding:
Charging device F/Haldex 2 coup. VAS 6291
Drip Tray for VAS 6100 VAS 6208
Requirements
^
The final drive must be in the installation position.
-
Vehicle diagnosis, testing, and information system VAS 5051B and vehicle diagnosis and service system VAS 5052, connecting.
-
Select "Suspension (Repair Group 01; 40 through 49)".
-
Select "All Wheel Drive with Haldex clutch" on the display.
-
Select "01 - On Board Diagnostic capable systems" on the display.
-
Select "All Wheel Drive Haldex" on the display.
-
Select "Electrical components" on the display.
-
Select "Oil temperature" on the display.
^
The oil temperature must be 20 to 40°C.
^
Oil temperature can be obtained by driving vehicle to warm it.
Note:
^
Lay a cloth on the crossmember -arrows-.
^
If oil gets on the crossmember or enters the perforations in the crossmember, it must be carefully removed.