R32 4Motion V6-3.2L (CBRA) (2008)
Air Bag: Service and Repair
Rear Side Airbag, 4 Door
Rear Side Airbag, 4 Door
NOTE: Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing
CAUTION: Observe safety precautions for working on airbags.
-
Disconnect vehicle battery
-
Remove seat bench .
-
Remove side upholstery with side airbag, 4-door, - 1 -.
-
Remove the two bolts - 2 - (9 Nm).
NOTE:
-
The bolts are microencapsulated and must therefore be replaced after every removal.
-
Before installing the new bolts, the threads of the corresponding nuts must be cleaned.
-
Remove rear side airbag connector coupling - 3 - from mount in side upholstery - 1 -.
-
Remove rear side airbag - 3 - from side upholstery.