R32 4Motion V6-3.2L (CBRA) (2008)
Alternator Pulley: Service and Repair
Ribbed Belt Pulley Without Freewheel
Ribbed Belt Pulley without Freewheel
Special tools, testers and auxiliary items required
-
Socket VAS 3310
-
Torque Wrench V.A.G 1332
Removing
-
Remove generator
-
Tighten the generator in a vise at the attachment points.
-
Use socket insert VAS 3310 to remove mounting nut of overrunning clutch pulley from generator shaft.
Installing
Install in reverse order of removal, noting the following:
-
Tighten M10 ribbed belt pulley nut to generator shaft to 65 Nm.