R32 4Motion V6-3.2L (CBRA) (2008)
Axle Beam: Service and Repair
Rear Axle (Aluminum Subframe)
Rear Axle (Rabbit, Aluminum Subframe)
Special tools, testers and auxiliary items required
^
Torque Wrench V.A.G 1332
^
Engine/transmission jack V.A.G 1383 A
Subframe with components, removing
Note: Be aware that if there is additional work where the drive shaft 6-point or 12-point bolt must be loosened, this must also occur with the vehicle
resting on its wheels. Remove the drive axle 6-point or 12-point bolt.
-
Remove wheels.
-
Disconnect electrical connections between rear axle and body.
-
Remove bolt -arrow-.
-
Pry off securing clip -1- for brake cable.
-
Press lever -2- in direction of -arrow- thereby disengaging hand brake cable -3-.
-
Remove bolt -1- and remove parking brake cable -2- from brake cable bracket.