R32 4Motion V6-3.2L (CBRA) (2008)
/Page-1385001.png)
Stabilizer Bar: Procedures
Stabilizer Bar, Aluminum Subframe and Steel Wheel Bearing Housing Assembly Overview
Stabilizer Bar, Aluminum Subframe and Steel Wheel Bearing Housing Assembly Overview, AWD (Rabbit)
The -arrow- points in driving direction.
1 - Stabilizer bar
^
Note different suspension versions
2 - Mount
^
Replace mounts always on both sides of vehicle
3 - Clamp
4 - Bolt
^
25 Nm plus an additional 90° turn
^
Tighten uniformly
^
Always replace after removal
^
Always tighten bolts in curb weight position Aluminum and Steel Rear Axle in Curb Weight Position (Rabbit)
5 - Wheel Bearing Housing
6 - Nut
^
45 Nm
^
Self-locking
^
Always replace after removal
7 - Bolt
8 - Coupling rod
^
Connects the stabilizer bar to the longitudinal control arm/wheel bearing housing
9 - Subframe
Stabilizer Bar, Steel Subframe and Aluminum Wheel Bearing Housing Assembly Overview
Stabilizer Bar, Steel Subframe and Aluminum Wheel Bearing Housing Assembly Overview, AWD (Rabbit)
The -arrow- points in driving direction.
