R32 4Motion V6-3.2L (CBRA) (2008)
1 - Stabilizer bar
^
Note different suspension versions
2 - Mount
^
Replace mounts always on both sides of vehicle
3 - Clamp
4 - Socket head bolt
^
M8 x 28
^
25 Nm plus an additional 45° turn
^
Always replace after removal
5 - Wheel Bearing Housing
6 - Nut
^
M10 x 55
^
40 Nm
^
Self-locking
^
Always replace after removal
7 - Socket head bolt
^
Always replace after removal
8 - Coupling rod
^
Connects the stabilizer bar to the longitudinal control arm/wheel bearing housing
9 - Subframe