R32 4Motion V6-3.2L (CBRA) (2008)
23 - Bolt
^
Always replace after removal
^
Always tighten bolts in curb weight position.
24 - Tie Rod
^
Closed in direction of travel
25 - Bolt
^
Always replace after removal
^
Always tighten bolts in curb weight position.
26 - Nut
^
M12 x 1.5
^
90 Nm plus an additional 90° turn
^
Self-locking
^
Always replace after removal
Wheel Bearing Housing and Trailing Arm, Aluminum Subframe and Steel Wheel Bearing Housing
Assembly Overview
Wheel Bearing Housing and Trailing Arm, Aluminum Subframe and Steel Wheel Bearing Housing Assembly Overview, AWD (Rabbit)
The -arrow- points in driving direction.
1 - Bolt
^
50 Nm plus an additional 45° turn
^
Always replace after removal
2 - Mounting bracket
3 - Bolt
^
M12 x 1.5 x 80
^
90 Nm plus an additional 90° turn
^
Always replace after removal
4 - Coupling rod
5 - Bolt
^
90 Nm plus an additional 90° turn
^
Always replace after removal
^
Only aluminum wheel bearing housing are available as a replacement part; therefore when exchanging, there are certain parts which must be