R32 4Motion V6-3.2L (CBRA) (2008)
^
Always replace after removal
10 - Selector lever cable
^
Do not grease
11 - Hex nut with washer
^
8 Nm
^
Quantity: 4
Selector Lever Emergency Release
Selector Lever Emergency Release - 02E, 6 Speed DSG A/T AWD
-
Unclip shift cover and hold aside.
-
Operate brake or activate parking brake.
-
Press on the yellow plastic piece on top of the solenoid pins from right to left.
Selector Lever Cable, Checking
Selector Lever Cable, Checking - 02E, 6 Speed DSG A/T AWD
Short description
To check selector lever cable for ease of movement, selector lever cable must be removed from transmission and removed end must be set aside so
that it does not make contact anywhere.
Then selector lever is moved and finally cable is reinstalled at transmission.
After that, selector lever cable must be adjusted.
Do not grease the cable connections.
Checking
-
Place the selector lever in the "P" position.
-
Remove cable from lever on transmission.
-
Move selector lever from "P" to "S" and back to "P" several times.
^
Selector lever must have freedom of movement while doing so.
-
Reinstall cable with new lock washers and loosened adjustment screw.
-
Adjust cable.
Selector Lever Cable, Adjusting
Selector Lever Cable, Adjusting - 02E, 6 Speed DSG A/T AWD
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331