R32 4Motion V6-3.2L (CBRA) (2008)
Shifter A/T: Removal and Replacement
Selector Lever Cable
Selector Lever Cable - 02E, 6 Speed DSG A/T AWD
Note: After installing, check cable for ease of movement and adjust.
Removing
-
Place selector lever in "S".
-
Loosen adjustment screw -arrow-.
-
Remove the lock washers -A- and -B-. They must be replaced later when adjusting the cable.
-
Raise the vehicle.
-
Remove the heat shield and parts of the exhaust system, if necessary.
-
Remove the heat shield.
-
Remove selector housing under selector lever.
-
To remove the cable, press the pins up with a screwdriver
-
At the same time, press the securing tab that is securing the pins forward -arrows-.