R32 4Motion V6-3.2L (CBRA) (2008)
Replace bolts -A through C-.
Tighten the pendulum support first to the transmission -arrows B and C- and then to the subframe -arrow A-.
-
Install the exhaust system and align it without of tension.
If Droning Noises Are Heard While Driving, Proceed as Follows
-
Remove the balance nut and balance washer -arrows-.
-
Then, if necessary, remove driveshaft with flexible disc from flange on rear final drive and rotate one hole and reinstall.
If The Droning Noises Are Still Heard
-
Install the driveshaft one more time, rotated one hole relative to the flange.
-
Install the noise insulation.
Driveshaft Constant Velocity Joint