R32 4Motion V6-3.2L (CBRA) (2008)
-
Secure the driveshaft against falling down with the strap from the universal transmission adapter VAG 1359/2.
-
Remove the flexible disc from the driveshaft tube -arrows-.
Installing
Install in reverse order, paying attention to the following:
Note:
^
Sealing rings in driveshaft flanges -arrow- must not be damaged when removing and installing.
^
Replace driveshaft if damaged.
^
Do not tip rear driveshaft tube, push horizontally onto centering pins.
^
Install all driveshaft parts marked in relation to each other in same position when reinstalling.
Location of Flexible disc with Vibration Damper
^
Brace on outer diameter -arrows- faces away from driveshaft tube.
^
Three projecting sleeves each on rear final drive flange and driveshaft flange engage in flexible disc mounting holes.
-
Tighten the flexible disc on the driveshaft tube -arrows-.