R32 4Motion V6-3.2L (CBRA) (2008)
-
Insert ball hub into ball cage via two chamfers. The installation position is at random. Press balls into cage.
There are 2 different distances between ball tracks of ball hub, a larger and a smaller one.
-
Insert hub with cage and balls upright into joint piece, a smaller space - b - must face toward open side of joint piece when doing this.
-
Also observe chamfer on inner diameter of ball hub which must be visible after swinging in.
-
Swing in ball hub; to do so, swing out hub far enough out of cage -arrows- (as depicted in illustration).