R32 4Motion V6-3.2L (CBRA) (2008)
-
Remove oil filler plug -arrow-. (Shown with final drive removed for the sake of a better illustration).
-
Disconnect the adapter -A- and elbow -B-.
-
Screw in adapter -A- to stop.
-
Engage the elbow -B- with the adapter -A-.
-
Route hose over driveshaft.
^
Hose must not hang through. It must enter above left rear wheel on vehicle.
-
Lower the vehicle.
-
Make sure valve -arrow- is closed.
-
Install the oil container -A- on the charging device F/Haldex 2 coup. VAS 6291.
-
Open the valve -arrow- and hold the oil container as shown in the illustration.
Haldex clutch is now filled.
-
Raise vehicle after a few minutes.
Note: