R32 4Motion V6-3.2L (CBRA) (2008)
Control Module: Removal and Replacement
All Wheel Drive Control Module
Special tools, testers and auxiliary items required
^
Torque wrench 5-50 Nm VAG 1331
^
Drip tray for VAS 6100 VAS 6208
Removing
Note: When removing control module -1-, cover -2- and plate spring -5- are removed together. Pressure sensor -4- and valve -3- are removed
separately.
-
Switch ignition off.
-
Separate connectors -1- and -2- on control module.
-
Place drip tray under final drive.
-
Remove screws -arrows-.