R32 4Motion V6-3.2L (CBRA) (2008)
Power Window Safety Switch: Service and Repair
Driver Interior Locking Button
NOTE: Push Button Illumination L76, which cannot be replaced separately, is integrated in Drivers Interior Locking Button E308.
Removing
-
Turn off the ignition and all electrical consumers.
-
Remove door trim
-
Disconnect harness connector - 1 - and remove mounting bolts - 2 -.
-
Remove door opener with switch from door trim.
-
Disengage retaining tabs - arrows - and remove interior locking switch from installation frame.
Installing
Install in reverse order of removal.