Rabbit L5-2.5L (BGP) (2006)
Drink Holders: Service and Repair
Cup Holder, Highline Center Console, Servicing
Cup Holder, Highline Center Console, Servicing
If a cupholder is loose or has fallen out, it is not always necessary to replace it. It may be possible to service it.
Checking if servicing is possible
A partial replacement should only be done if servicing is not possible, e.g. because components are too heavily deformed, broken, broken off or damaged
in any other way and correct function of the cupholder can no longer be ensured because of this.
-
Remove Highline center console cupholder.
-
Loosen cover - 1 - from cupholder - arrow -.
-
Check all four cupholder mounting points - 1 - for damage.
-
If a mounting point - 2 - is bent up sharply, replace cupholder.
NOTE: The cupholder should be replaced if there is any further damage to components that affects proper cupholder function.
Cupholder, servicing
-
Insert lower cover - 1 - over outer mounting pins - 2 - and - 3 - in cupholder.