Rabbit L5-2.5L (BGP) (2006)
Installing
-
Installation is performed in the reverse order of removal.
Wheel Housing Trim (4-Door), Removing and Installing
Wheel Housing Trim (4-door), Removing And Installing
NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Remove rear seat bench
-
Remove 4-door side upholstery:
-
with rear side airbags
-
without rear side airbags
-
Remove the two bolts - 1 - (1.2 Nm).
-
Remove clip - 2 - from body flange.
-
Pull trim - 3 - from door seal tubing - 4 -.
-
Pull trim out of mounts in sill panel trim - 5 -.