Rabbit L5-2.5L (BGQ) (2008)
Tail Lamp: Adjustments
Tail Lamps, Adjusting
NOTE: On vehicles from 11.05, an adjustment element is installed which can be used to adjust the flush dimension to the bumper cover. On vehicles
before 11.05, this adjustment is not possible.
-
If the tail lamp does not sit flush as shown in the illustration, it can be adjusted with the adjusting element. An adjustment of ± 2 mm is possible.
-
Press side trim - 1 - to side in - direction of arrow -.
-
Loosen nuts - 1 - on tail lamp in side panel.