Rabbit L5-2.5L (CBUA) (2008)
Installing
-
Installation is performed in the reverse order of removal.
Left Trim, Driver Side
Left Trim, Driver Side
Removing
NOTE: For clarity, the steering wheel is not depicted in the illustration, it is not necessary to remove it.
-
Switch off ignition.
-
Remove side instrument panel cover on front passenger-side
-
Press rotary light switch toward front, rotate it toward right until it stands vertically, now pull it out and disconnect wiring harness.
-
Remove steering column trim gap cover from instrument panel. It is not necessary to remove the complete steering column trim.
-
Remove storage compartment - 1 - from mounts.
-
Remove the two bolts - 2 - (1.5 Nm).
-
Remove the two bolts - 3 - (1.5 Nm).
-
Remove bolt - 4 - (1.5 Nm).