Rabbit L5-2.5L (CBUA) (2008)
Rear Knuckle Alignment Link: Procedures
Subframe, Transverse Link, Tie Rod Assembly Overview (Rabbit)
1 - Eccentric bolt
^
For camber adjustment
^
After loosening, perform vehicle alignment
2 - Nut
^
M12 x 1.5
^
95 Nm
^
Self-locking
^
Always replace after removal
^
Always tighten threaded connections in curb weight position:
3 - Eccentric washer
^
Inner bore with tab
4 - Eccentric bolt
^
For toe adjustment
^
After loosening, perform vehicle alignment
5 - Eccentric washer
^
Inner bore with tab
6 - Nut
^
95 Nm
Note:
^
Adjust torque wrench V.A.G 1332 to 80 Nm when tightening nut.
^
This torque specification applies only in conjunction with insert tool T10179.
^
M12 x 1.5
^
Self-locking
^
Always replace after removal
^
Always tighten threaded connections in curb weight position:
7 - Subframe
8 - Bolt