Rabbit L5-2.5L (CBUA) (2008)
-
Remove nuts -arrows- for shift mechanism housing.
-
Remove entire air filter housing.
-
Remove lock washer -3- for shift cable from transmission shift lever -1-.
-
Remove lock washer -4- for selector cable from relay lever -2-.
-
Pull selector cable and shift cable off from pins -arrows-.
-
Remove cable mounting bracket from transmission -arrows- ; if necessary, unclip hose -A- at -B- bracket.
-
Remove noise insulation.
-
Remove tunnel braces.
-
Disconnect front exhaust system at double clamp and remove from subframe.
-
Disengage rear exhaust system and remove heat shield.
-
Pivot shift housing downward and remove with shift cables.