Rabbit Hatchback L4-1588cc 1.6L DSL SOHC (1983)
Front Door Hinge: Technical Service Bulletins
Tools - New Tool for Aligning Door Hinges
Applies To
RABBIT, SCIROCCO
JETTA, QUANTUM
1983 - 1984 Models
Group
57
Subject
Doors
Part Identifier N/A
Key Points
New tool for aligning door hinges
(Supercedes Product Circular, Group 57, No. 84-01)
B 010
Number
84-02
September 25, 1984
A universal door aligning tool is available for adjusting door hinges. The tool consists of two pins with M 8, M 10 and M 12 threads and a length of
tubing.
This tool, No. 3114, is used to align most upper and lower hinges of front and rear doors..
The following procedure describes the use of this tool.
Door hinges, adjusting
-
remove clamping washer and pin from door check strap
-
remove door hinge securing bolt and screw in appropriate pin in its place
-
tighten pin
-
soften paint around hinge area on body with a heat gun