Rabbit Hatchback L4-1588cc 1.6L DSL SOHC (1983)
Throttle Position Switch: Technical Service Bulletins
Throttle-Valve Switch - Check/Adjust, CIS Changes
Applies To
RABBIT GTI
1983 model
(Supersedes Product Circular, Group 25, No.. 82-03)
Group
25
Subject:
Engine
Part Identifier N/A
Key Points
^
CIS changes
^
Throttle-valve switch, checking/adjusting A 038a
Number
83-01
February 8, 1983
Throttle-valve switch for full load enrichment, checking/adjusting
-
disconnect wire 1 (wire with red tracer) on throttle valve switch
Note
Brown wire (ground) must not be removed from switch for this test
-
connect test light 3 between battery + and contact on throttle valve switch
-
push throttle valve lever in direction of arrow (wide open) until test light lights up (click in switch can be heard)
^
gap a = min. 0.8 mm (0.031 in.) max.. 1.6 mm (0.063 in.)
-
adjust gap if necessary with screw 4 to
^
a = 1.2 +/- 0.4 mm (0.047 +/- 0.016 in.)
CIS changes
^
Air flow sensor - with 80 mm (3.150 in.) diameter plate
^
Fuel distributor - with spring above control plunger
^
Fuel accumulator - (3-bar) Spare Part No. 431 133 441 D
