Rabbit Hatchback L4-1588cc 1.6L DSL SOHC (1983)
14
Circlip (always replace)
-
Do not overstretch
-
Must seat properly in groove
15
Operating sleeve/synchronizer hub for 3rd/4th gear
-
Pressing off operating sleeve and synchronizer hub for 3rd and 4th gear
^
A =Separator, e.g. Kukko 17/1, 12-75 mm
-
Identification of 3rd/4th gear synchronizer hub is one of two ways:
^
Continuous circular groove (arrow A) at center (4th gear side)
^
Axial groove on tips of spline teeth (arrow B)