Scirocco L4-1715cc 1.7L SOHC (1983)
-
to install, place small amount of silicone sealer on four mounting points of lens carrier (arrows)
-
attach electrical leads and move lock ring clockwise to secure lens
If the electrical adjustment function of the mirror does not operate, perform the following check:
-
remove mirror lens
-
remove four Phillips screws holding motor-clutch assembly
-
check that all four electrical wires are in and secure at rear of motor drive assembly
-
reassemble mirror
Binding or sticking mirrors can be made to operate smoothly by cleaning the motor drive unit:
-
remove mirror lens
-
remove motor-clutch assembly
-
clean inside and outside of motor drive unit with WD-40(R) or equivalent
CAUTION
Do not use silicone spray.
-
wipe assembly clean and dry
-
install motor-clutch assembly
-
operate mirror without glass lens
-
install lens and check function
Labor operation:
66 78 11 0
T.U.
25