Scirocco L4-1781cc 1.8L DOHC (1986)
-
remove wheel house molding
^
use knife to cut through adhesive (arrow)
-
remove remaining adhesive to a thickness of 1.0 mm (0.04 in.)
-
remove any other adhesive with 3M General Purpose Adhesive Cleaner or equivalent
Wheel house moldings, installing
Work sequence
-
apply bead of polyurethane adhesive sealer AKD 476 KD5 05 8-10 mm (.31-.39 in.) wide to wheel house molding
-
reinstall wheel house molding and screws
-
reinstall inner fender liner if applicable
-
apply adhesive to spoiler and reinstall
^
front or rear
-
apply adhesive to rocker panel molding and reinstall