Scirocco L4-1781cc 1.8L DOHC (1986)
-
Move cam bracket (a) into middle of position. See illustration.
-
Remove regulator mechanism.
-
Bend sheet metal tongues (b) and (c) OUTWARD to approximately 45~ angle.
-
Cut end of slide rail (d) 1/2 inch from end and bend to approximately 15~ angle inward toward cable block.
-
Lubricate slide rail lightly with multipurpose grease.
-
Install regulator into door.
-
Install reinforcement plate P/N 533 837 493, to cam bracket (a) and window bracket.
-
Install bushing (k) opposite window glass so that it works as a stop in the curvature (1) in closed position.