volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Sensors and Switches - Powertrain Management > < Interior Light - Inoperative
Page 1
background image

Turn Signal Switch: Service and Repair

1.

Disconnect battery ground cable.

2.

Pulling gently, remove steering wheel center pad.

3.

Remove steering wheel retaining nut and washer, then the steering wheel.

4.

Remove screws retaining switches to steering column.

5.

Pull switches out gently, then disconnect multi-pin electrical plugs.

6.

Remove switches from steering column.

7.

Reverse procedure to install.

Sensors and Switches - Powertrain Management > < Interior Light - Inoperative