Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
-
Pull the rear bumper cover - 1 - out of the catches in the guide profile - 3 - - arrows -.
-
Disconnect harness connectors of installed electrical components.
-
Remove the release button bracket - 9 - out of the bumper cover - 1 - catch - 9 -- arrow c -.
-
Remove the bracket downward - arrow c -.
Installation
To install, perform the steps used for removal in reverse order.
-
Make sure gaps are parallel and note gap dimensions.
Trailer Hitch
Removal
‹› The tightening specifications only apply to factory-installed trailer hitches.
‹› Obtain tightening specifications of other tow hitches from corresponding manufacturer.
‹› The bolts - 2 - are not loosened.
-
Remove bumper cover.
-
Disconnect the electrical connector leading to the vehicle.
-
Remove the bolts - 3 -.