Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-1615002.png)
Rear Wheel Housing Liner
‹› Removing and installing is described only for the right rear wheel housing liner. Removing and installing left rear wheel housing liner is derived
accordingly from this.
Removal
-
Unbolt wheel.
-
Remove the bolts - 5 -.
-
Pull the wheel housing liner - 1 - in the rear area.
-
Pull the wheel housing liner - 1 - upward out of the sill cover - 4 -.
Installation
‹› The speed nuts - 3 - are gas-tight.
