Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Radiator Support: Procedures
Lock Carrier Service Position
=> [ Service Position, Setting ]
=> [ Service Position, Resetting ]
=> [ Pressure Hoses, Disconnecting ]
Service Position, Setting
-
Remove front bumper cover
-
In vehicles with charge air cooler, disconnect pressure hoses.
-
Remove the bolts - 4 - at left and right longitudinal member.
-
Remove rear bolt - 5 - from the left and right headlamp.
-
Install the (T 10093) on the left and right longitudinal members.
-
Remover upper left and right bolts - 2 - from brackets - 3 -.
-
The lock carrier - 1 - together with the angle brackets- 3 - can be pulled approximately 10 cm forward onto the (T 10093).
Service Position, Resetting
To install, perform the steps used for removal in reverse order.