Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Head Rest: Service and Repair
Headrest Guides
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1783)
‹› Torque Wrench (V.A.G 1331)
‹› Engine and transmission holder (VAS 6095)
‹› Fixture for seat repair (VAS 6136)
‹› Headrest guides are shown removed to provide a better illustration.
-
Mount the fixture for seat repair (VAS 6136 ) on the engine and transmission holder (VAS 6095 ).
-
Remove front seat => [ Front Seat ] See: Service and Repair/Removal and Replacement/Front Seat
-
Attach the seat to the fixture for seat repair ( VAS 6136).
-
Remove the front safety belt latch => [ Front Seat Belt Latch ] See: Restraint Systems/Seat Belt Systems/Seat Belt Latch/Service and Repair/Front
Seat Belt Latch
-
Remove the trim on the tunnel side => [ Tunnel Side Trim ] See: Service and Repair/Removal and Replacement/Tunnel Side Trim
-
Remove the lumbar adjustment lever, if equipped => [ Lumbar Adjustment Lever ] See: Service and Repair/Removal and Replacement/Lumbar
Adjustment Lever
Passenger seat without height adjustment
-
Remove the backrest adjustment wheel => [ Backrest Adjusting Wheel ] See: Service and Repair/Removal and Replacement/Backrest Adjusting
Wheel
-
Remove the trim on the door sill side => [ Front Sill Panel Trim ] See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Sill Panel
Trim
Passenger Seat with Pass-Through
-
Remove the trim on the door sill side => [ Front Door Trim ] See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair/Front Door Trim
Front seats with manual height adjustment
-
Remove the backrest adjustment wheel => [ Backrest Adjusting Wheel ] See: Service and Repair/Removal and Replacement/Backrest Adjusting
Wheel
-
Remove the trim on the door sill side => [ Front Sill Panel Trim ] See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Sill Panel
Trim
Electric Driver Seat
-
Remove the trim on the door sill side => [ Front Sill Panel Trim ] See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Sill Panel
Trim
-
Disconnect the two harness connectors for the backrest drives underneath the seat frame. Remove the harness connectors from the seat frame.
All vehicles
-
Remove backrest => [ Backrest ] See: Service and Repair/Removal and Replacement/Backrest
-
Attach the backrest to the fixture for seat repair (VAS 6136).
-
Remove the backrest and folding table, if equipped => [ Backrest Folding Table ] See: Service and Repair/Removal and Replacement/Backrest