Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Sound Proofing / Insulation: Service and Repair
Noise Insulation Assembly Overview
=> [ Long Version ]
=> [ Short Version ]
Long Version
‹› Slight changes may have to be made to removal and installation procedures, depending upon engine installed in vehicle.
‹› The screws - 3 - are microencapsulated and therefore must be replaced after loosening.
1
Noise Insulation
‹› - arrow a - points in the direction of travel
‹› Removing:
-
Remove the bolts - 2, 3 and 4 -
-
Pull the noise insulation toward the rear out of the lock carrier mounts.
‹› Installing:
-
Push the noise insulation in the - direction of arrow b - into the lock carrier mounts.
-
Tighten the bolts - 2, 3 and 4 -.