Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
‹› The notch on the vibration damper must line up with the arrow marking on the timing chain lower cover.
‹› The markings - 1 - on the camshafts must point upward.
-
Remove the lower timing chain cover => [ Chain Drive ] See: Service and Repair/Removal and Replacement/Table of Contents/Chain Drive.
-
Press the oil pump chain tensioner in the - direction of the arrow - and secure it with a locking pin (T40011 ).
-
Remove the oil pump chain tensioner - 1 -.
-
Remove the oil pump chain tensioner.
-
Using a screwdriver, lift the chain tensioner locking wedge in the - direction of arrow 1 -, press the timing chain tensioning rail in the - direction
of arrow 2 - and secure it with Locking Pin (T40011).