Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-456002.png)
-
Remove the coolant pump from the centering pin and remove the oil cooler.
Installing
‹› Replace seals and O-rings.
-
Coat the O-rings - 4 - with coolant.
-
Make sure both centering pins are installed in the cylinder block.
-
Install the connection piece - 2 - into the oil cooler - 1 -.
-
Push the coolant pump - 3 - onto the connection piece and onto the centering pins in the cylinder block.
-
Tighten bolts in - 1 to 5 - sequence.