Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
-
Push the seal - 1 - onto the balance shaft.
‹› "Luftseite" or ("Outside") - arrow - must be readable from the outside.
-
Mount the thrust piece (T10353) on the seal - 1 - and press it into the cylinder block all the way with the screw - 2 -; when doing this, do not bend
the sealing ring.
-
Install the coolant pump toothed belt => [ Coolant Pump Toothed Belt, Removing and Installing ] See: Coolant Pump Toothed Belt, Removing
and Installing.
The rest of the installation follows the reverse of the removal procedures.