Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Control Assembly: Service and Repair
Heater Controls
Heater Controls
Removing
‹› The controls consist of two separable housings. Before removing controls, bring rotary buttons into the following positions:
‹› Heater control to cold
‹› Blower to 0
‹› Air flow direction to footwell
-
Remove the heat and A/C controls panel.
-
Unscrew bolts - 2 - (4.2 x 45) and - 3 - (4.2 x 16) and remove controls - 1 - from center console.
Tightening specification for bolts - 2 - and - 3 -: 1.5 ± 0.2 Nm.
-
Disengage harness connector release catch - A - by pulling in direction or arrow - 1 -.
-
Disengage harness connector release catch - B - to connector - arrow 2 - and disconnect connector - C -.
-
Disengage harness connector release catch - D - and disconnect connector - D -.
‹› Illustration shows "Climatic" version. The procedure for releasing the connector is the same.