Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Repeat work procedure on right side of vehicle at front.
-
Unscrew both wheels at rear axle in order to reach the bleed screws.
-
Pull cover caps off brake caliper bleeder screws
-
Connect collector bottle bleeder hose - 1 - to left rear bleeder screw.
-
Open bleeder screw and let the corresponding amount of brake fluid (see table) flow out. Close bleeder screw. Torque, refer to =>
Suspension, Wheels, Steering 47 Description and Operation
-
Repeat work procedure on right side of vehicle at rear.
Vehicles with Manual Transmission
Remove air filter box.
-
Place bleeder hose on clutch slave cylinder bleeder valve - arrow -.