Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
‹› The ABS sensor ring is installed in the wheel bearing.
‹› Removing and installing, refer to => [ Wheel Bearing and Wheel Hub ] See: Steering and Suspension/Suspension/Service and Repair/Removal
and Replacement/Rear Suspension.
The wheel bearing and wheel hub are installed together in a housing.
‹› This wheel bearing/hub unit is maintenance and adjustment free. Adjusting and servicing is not possible!
17
Bolt
‹› M6 x 12
‹› 12 Nm
18
Cover Plate
19
Bolt
‹› M12 x 1.5 x 80
‹› 90 Nm + 90° turn
‹› Always replace after removal.
20
Bonded Rubber Bushing
‹› Replacing, refer to => [ Trailing Arm Bonded Rubber Bushing ] See: Steering and Suspension/Suspension/Service and Repair/Removal and
Replacement/Rear Suspension.
21
Bolt
‹› M10 x 35
‹› 50 Nm + 45° turn
‹› Always replace after removal.