Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
‹› When doing this, small diameter of single wire seal must point toward contact housing.
-
Slide single wire seal - A - onto repair wire up to the contact housing.
-
Slide single wire seal - A - into contact housing until it stops using the corresponding assembly tool - B -.
-
Shorten the repair wire and the vehicle-specific wiring harness single wire as needed using the wire stripper (VAS 1978/3 ).
-
Crimp the stripped ends of repair wire and single wire of vehicle-specific wiring harness using crimp pliers and a crimp connection as described in
chapter wire break with single repair point. Refer to => [ Wire Break with Single Repair Point ] See: Service and Repair/Procedures/Wire Break
with Single Repair Point.