Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Fuel Injector: Service and Repair
Fuel Injectors, Removing and Installing
Fuel Injectors, Removing and Installing
Special tools, testers and auxiliary items required
‹› Tool set (T10133)
‹› The puller (T10133/2) was changed. It is now called the puller (T10133/2A). If the new tool is not available, the old one can be modified.
Remover (T10133/2) has been changed to Remover (T10133/2A)
Special tools, testers and auxiliary items required
‹› Round file approximately 6mm
-
File the semi-circle as shown in the illustration. The semi-circle allows the tool to slide farther onto the fuel injector, thus providing the tool with a
larger contact surface.
-
Mark the modified tool with an "A" at the end of the tool number.
Fuel injector, individual parts